Guest Anonymous Posted December 3, 2001 Share Posted December 3, 2001 I was givin a mallory unilight dist and was going to put it in my brother's 84 f body. We are taking off all the computer card and dist etc and going to a edlebrock RMP and holley 600. The dist has three wires coming from it. Where do they go? ... and do I need some sort of MSD type box. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted December 3, 2001 Share Posted December 3, 2001 On my FORD Unilite (carb engine), the red wire goes to the ignition (+) side of the coil (where your 12vdc from the ign switch meets it). The green wire goes to the other side (-) of the coil (where I have the tach wire also attached), and the brown wire goes to chassis ground. I hope this is the same as the Chevy set-up Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted December 3, 2001 Share Posted December 3, 2001 Thanks Mr. Blue Oval. I will give it a try! Do I need any type of spark box? Quote Link to comment Share on other sites More sharing options...
blueovalz Posted December 3, 2001 Share Posted December 3, 2001 A plain coil to a spark box will work, either way. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted December 3, 2001 Share Posted December 3, 2001 Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.