Jump to content
HybridZ

260Z (late model?) ZX Booster Flip?


Recommended Posts

I believe I have a late model 74' 260z since a ZX Booster mounts without having to drill new holes.  I read a bunch of posts and I recall installations requiring to flip the booster upside down to fit.  I did that and now the last 1" of pedal travel (before it hits the brake switch) has a noticeable "stick".  It sounds like a thud and feels like the boost and/or rod are getting hung up somewhere.  I checked around the linkage and nothing is interfering.  The rod to the booster seems to attach to the brake pedal arm easily, but it's hard to tell if it's going in straight.  I'm thinking the booster needs to be re-installed in reverse to get better alignment?  Or is this behavior normal?  All my tests were without the engine on.  Is it possible having no vacuum causes this phenomenon?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...