Jump to content

Loosing power on top end


Recommended Posts

I have a 71 240z with an l28 and round top hitachi carburetors. It does have an electric fuel pump with a pressure regulator to keep the fuel pressure down to about 3.25 psi for the carburetors. The problem is that when I am accelerating as soon as I reach about 4500 rpms it stops pulling. With my foot flat on the floor the revs will keep pick up a little bit but it seams like it hits a brick wall and is making zero power at that point. 

Thank you for any ideas to what my issue is any help is greatly appreciated. 

Link to comment
Share on other sites

  • Create New...