Flak280z Posted February 4 Share Posted February 4 (edited) I'm back, this time with an electrical issue I can't figure out. Hazards work, turn signals don't. I know, I know, use the search feature. Did that and did some tracing. I'm getting around 0.8v at the GY wire at the hazard switch junction, but then I go to the GY wire at the turn signal flasher unit, and nothing. Signals work if I jump then at the Black C9 connector, but it seems I'm losing power somewhere along the line, and can't seem to figure it out. Looking at the wiring diagram, it seems that the GY wire powers to signals, so I assume I'm losing power between the hazard switch and flasher unit for turn signals? Does it go straight from the hazard switch to the turn signal flasher, or does it go back to connector C9 and then the flasher unit? -Flak Edited February 4 by Flak280z Quote Link to comment Share on other sites More sharing options...
Flak280z Posted February 4 Author Share Posted February 4 Seems like I need to buy or rebuild my hazard switch. 12v input, not outputting the 12v out of the GY wire. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.