Guest Anonymous Posted February 17, 2002 Share Posted February 17, 2002 i am at the start of a low buck conversion and right now i have a stock 350 w/summitt block huggers,i also have two edelbrock intakes both single plane a victor jr. and an older streetmaster what i need to know is can i get away with either of these on my stock 350 w/600 holley carb, long enough to budget a performer intake a little later on. thanks for your help and also jimzdat im in chattanooga thanks again rick Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted February 17, 2002 Share Posted February 17, 2002 The Streetmaster ought to be OK w/your 600. PRobably won't be an IDEAL match for the cam like a performer, but better than the VJ. As I recall, this one was for 2500-6500 rpm vs 1500-5500 for the dual planes. You will probably loose a little low-end torque, but you have more than you need anyway! After you build the engine, use the Victor Jr. a(assuming you have the cam can carb for it). I will probably use a Victor Jr. for a FI system I wnat to put in..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.