dmiller240 Posted July 7, 2003 Share Posted July 7, 2003 Hi all, Just finely starting on my Z after a very long brake. Looking for advice from people that have z8'ed already. My plans are to buy a sbc 350/330hp/380lb crate. carbed, don't want the hassle of injection wiring. I'm not worry about hood clearance using a 2" cowl fiber hood. I'm using the jtr setup. Would like to use a t56. I'm guessing the blocks being used are the pre-injection 350. Has any one do this setup? Or would I be better off, for simplicity, going with a wc t-5? This will be a street car maybe some A-cross. Quote Link to comment Share on other sites More sharing options...
DavyZ Posted July 8, 2003 Share Posted July 8, 2003 Welcome to the forum. Many guys are using the T56 in their cars: some use the Centerforce parts and one is using Weir's bellhousing adapter. You have to price it all out to see what you want. Use the search function and search the Drivetrain forum and the Chevy forum using key words like "T56" and "bellhousing," etc. Good luck! Davy Quote Link to comment Share on other sites More sharing options...
mas28O Posted July 8, 2003 Share Posted July 8, 2003 It would cost you less $$ if you just put a LT1/T56 in the car. The wiring is not that bad at all, just a few wires to hook up. Good luck Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.