mobythevan Posted August 7, 2003 Share Posted August 7, 2003 Added This is for the nissan BW T-5 for turbo L28 conversion Pretty basic stuff, but I figure it never hurts to get it into the archive. I finally got my slip yoke ordered in and the driveline guy said this was the first one of this type he has seen in 20 years, I know that only means he doesn't know much, but I bet other people will run into shops like this so... 26 spline 1.115" spline diameter I believe is what he said(I measured 1.08") 1.375" seal diameter (for sure) The 1.375" seal diameter is what was causing problems, he had plenty of yokes with 1.5" seal diameter. Once he measured that then he was able to get the right yoke ordered in. Quote Link to comment Share on other sites More sharing options...
Guest Phil1934 Posted August 7, 2003 Share Posted August 7, 2003 I usually get a new yoke, but the driveline co. said GM T5 yoke list was $220 and they could sell it at cost for $140. I went back to the junkyard and got the driveshaft out of the back seat of the firebird for $20. So pick one up while you are tranny hunting. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted August 7, 2003 Author Share Posted August 7, 2003 In my haste to put up the info I forgot to add that this was for the nissan borg waner T-5. The new yoke cost me $58. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.