john kosmatka Posted August 18, 2003 Share Posted August 18, 2003 Searched but couldnt find what i was looking for. So, I was wondering how much you guys have in the setup with the calipers and rotors and which are the best to go with. And I know the kits are high quality, but ar they well worth it in the end. Thanks John Quote Link to comment Share on other sites More sharing options...
Guest ON3GO Posted August 18, 2003 Share Posted August 18, 2003 $265 for his hats and mounts. $110 for the nice wilwood 12in rotors. like almost $300 for my calipers with pads but i could have gone cheaper. Quote Link to comment Share on other sites More sharing options...
john kosmatka Posted August 18, 2003 Author Share Posted August 18, 2003 Will a 15 inch rim fit, i wanna run these on track days and 17's on the street. Do the 15's have enough clearance. And at sometime maybe even run 14's in bad weather--i doubt it. Also any body using bump stop spacers, in motorsport it says 15inch and up what happens if you run 14's. Thanks John Quote Link to comment Share on other sites More sharing options...
Guest ON3GO Posted August 19, 2003 Share Posted August 19, 2003 ytou mean Bump steer spacers? i got them for 15in wheel and up. im running 17in wheels but i was told 16inch might fit with these brakes.. 15's no. Quote Link to comment Share on other sites More sharing options...
Guest Thurem Posted August 19, 2003 Share Posted August 19, 2003 For 15" wheels, check out this post by Juan (JSK) http://www.hybridz.org/phpBB2/viewtopic.php?t=24827 . You will wanna measure the inside diameter of your wheels. Also the caliper will stick out past the wheelmounting surface app 0.6" , this should not be a problem with most wheels. But do check just to be sure. Thure Quote Link to comment Share on other sites More sharing options...
GAZRNR Posted August 31, 2003 Share Posted August 31, 2003 Jumping on this on late as I have been sourcing my front brake parts - here is what I spent and a few thoughts for those conisdering this setup. JSK Hat Kit $241.95 - thru ebay auction Summit $ 93.90 wilwood 32 vane curved rotors Summit $ 60.20 wilwood "Q" compound street pads Behrent's $249.50 wilwood NDL calipers Behrent's $ 35.99 wilwood proportioning valve Pegasaus $ 21.91 -AN3 male to metric female fittings for caliper Total for kit $703.45 and this includes shipping for all parts Brake Kit is not yet installed but a few observations: 1) Juan at JSK Innovations is a 1st rate business man and very good to work with. His hat kit is a great value, 2) if I were sourcing the parts again I would get the rotors from Behrent's Performance in addition to the calipers & proportining valve and saved money on the rotors and shipping...maybe knock $20 off the total. They probally could have sold me the pads too but I ordered late at night and thought about making the phone call in the morning! Quote Link to comment Share on other sites More sharing options...
z-ya Posted September 5, 2003 Share Posted September 5, 2003 GAZRNR, Do you hav ethe Willwood part numbers for the rotors and calipers? http://www.precisionbrakescompany.com quoted me $102 for the 4 piston DL calipers, and the curved vane rotors for $57 each. They can make up custom SS brake lines for $30 each. Pete Quote Link to comment Share on other sites More sharing options...
GAZRNR Posted September 6, 2003 Share Posted September 6, 2003 The PN for thde Wilwood NDL calipers from Behrent's are: WIL120-4952 The PN for the rotory proportioning valve is: WIL260-2220 The PN for the right side rotor is: WIL160-2894 The PN for the left side rotor is : WIL160-2895 If you want to use your metric brake lines you will need 2 adaptors -3AN/female 10mm x 1.00. I got these from pegasus auto racing PN: 3265 hope this helps Quote Link to comment Share on other sites More sharing options...
Guest Looking for apt in Alb Ny Posted October 16, 2003 Share Posted October 16, 2003 Its confirmed I will be finally having the 5 lug Wilwood setup along with aluminum 4 and 5 lug hubs! Thanks Juan Quote Link to comment Share on other sites More sharing options...
z-ya Posted October 16, 2003 Share Posted October 16, 2003 I'm starting to look at calipers. The Billet NDL comes in 4 different piston sizes. Which is best for the 7/8" master cylinder. Better yet, what about the 15/16 MS? I'll be running the 240SX calipers in the rear. Pete Quote Link to comment Share on other sites More sharing options...
ToplessZ Posted October 16, 2003 Share Posted October 16, 2003 Since its confirmed lets hear more about these aluminum hubs. Is strength and issue since the stock ones where steel? What is the price going to be on those. They sound awesome. let us know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.