olie05 Posted October 16, 2003 Share Posted October 16, 2003 Has anyone installed a nitrous system on their fuel injected z? I was considering the mod with a direct port system and I couldn't think of a good place to put the jets, on top the manifold is crowded with fuel and emmissions junk and on the bottom are the hot headers. Does anyone have any Ideas for a setup? Quote Link to comment Share on other sites More sharing options...
fl327 Posted October 16, 2003 Share Posted October 16, 2003 I would put the jets right in the middle of each runner on manifold, thats for the big shots. For a smaller shot I would weld a nut to my intake piping off the tb and stick a jet or two there right before the throttle body. Quote Link to comment Share on other sites More sharing options...
510six Posted October 16, 2003 Share Posted October 16, 2003 I can give you a pic http://photos.yahoo.com/sss510six .you might want to look at the "soft" plastic lines that NOS is using now it would be a much simpler install and save a bit of sanity.(I spent a full day bending Nitrous lines to the foggers) Quote Link to comment Share on other sites More sharing options...
brokebolt Posted October 17, 2003 Share Posted October 17, 2003 510six, Heard of a six in a 510 never seen one. Nice plumbing on the nitrous. As for this topic my advice is start small and work up. Buddy had nitrous on this ride and poped the head first shot. Little bit too much. Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.