dsommer Posted October 28, 2003 Share Posted October 28, 2003 Here's the link any help out there PLEASE!!! http://www.hybridz.org/phpBB2/viewtopic.php?t=27463 thanks ds Quote Link to comment Share on other sites More sharing options...
dsommer Posted October 30, 2003 Author Share Posted October 30, 2003 Anybody? Well I'm just going to hook it up to a "hot" wire and hold my breath... ds Quote Link to comment Share on other sites More sharing options...
Mike kZ Posted October 30, 2003 Share Posted October 30, 2003 No idea what that is. Did you take it appart to see what's in there? It could be some aftermarket thingy Quote Link to comment Share on other sites More sharing options...
dsommer Posted October 30, 2003 Author Share Posted October 30, 2003 I took it apart as far as I dared. Inside there is a circuit board and the board is soldered to the housing, so with out breaking the weld that is a far as I could disassemble it. It shows a switch in my factory service manual but the wire colors are way off from what I've got. I just don't want to have to pull the dash after doing all this work. On a lighter note I got all the AM guages installed and wired up so the dash is just about ready to go back in. It's been out since early summer. I'm ready to start driving the car again and along comes winter, at least I got the heater core ready to pump some heat into the cabin this year. ds Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.