Guest VALMEIDA Posted February 20, 2004 Share Posted February 20, 2004 I have a 86 Z31! I am dropping a sbc 350hp engine with 700r4. Will my rear end hold up? What kind of rear end do I even have in that 86 Z31? Vman Quote Link to comment Share on other sites More sharing options...
Guest zfan Posted February 20, 2004 Share Posted February 20, 2004 You should have a r200 probably 3.54 rear gears. It is not a LSD..just a peg leg rear end. Should be just fine. Mike Quote Link to comment Share on other sites More sharing options...
dsommer Posted February 20, 2004 Share Posted February 20, 2004 Hmmm these are the kind of questions that a thread touched upon a week or so ago.... I've got X er uh Z and want XXX hp I've never done an engine swap before will I have to do this or that and BTW what kind of rear end do I have? Oh where do I buy mounts? I got into Z cars about 4 years ago. Before I started asking a bunch of questions I did RESEARCH (books Internet searching, etc), just so I didn't come across as a newbie. Quote Link to comment Share on other sites More sharing options...
Guest VALMEIDA Posted February 21, 2004 Share Posted February 21, 2004 I dont pretend to know what I am talking about, like some other guys! If you have a problem then dont respond!!!!! Quote Link to comment Share on other sites More sharing options...
JKDGabe Posted February 21, 2004 Share Posted February 21, 2004 He's just uptight because that's the kind of q' that's asked often and could be answered by scanning some of the older posts. Try reading back about a dozen pages (just scan... don't read every post) and you'd be surprised what you can find. And in the future check to see that you're putting it in the appropriate forum. Welcome to HybridZ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.