Guest Cronic Posted February 25, 2004 Share Posted February 25, 2004 My guage is no longer working, I had some engine work done that required the engine be removed, and now the sensor no longer works... Any ideas? Quote Link to comment Share on other sites More sharing options...
A. G. Olphart Posted February 26, 2004 Share Posted February 26, 2004 I'll assume that you have made sure the sensor wire is connected and the coolant system is actually full... So, this is what I'd do (try at your own risk): 1) Disconnect the sensor wire at the sensor and let it hang loose, then turn on the ignition and see if the guage shows any movement. 2) Now short it to ground, then turn the ignition on and see what the guage does. Hopefully one of the above will be zero, and the other full hot. If this is the case, replace the sensor, hook up the wire, and be on your way . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.