Guest znow white Posted June 1, 2004 Share Posted June 1, 2004 My turbo project is starting to roll a little faster still awaiting my shell though (in a week I should be getting it) I had a local high school strip my 280zxt I got everything ready for me at the school. Tommorow I should be picking up the engine, the differential and half shafts. what I have taken so far is ecu efi harness fuel pump coil afm oil cooler am I missing anything here just to get it running? I also have a box full of misc parts. like dist, alternator etc its going into a 76 280z I dont have to do emissions so IM getting rid of allot of crap. Quote Link to comment Share on other sites More sharing options...
GrayZee Posted June 2, 2004 Share Posted June 2, 2004 When you grabbed the injection harness, did you get the two relays that were plugged into it? (efi and fuel pump relays) There are also three plugs on the injection harness that form the link to the main harness. It might be a idea to cut the opposing sides of those plugs off the main harness to give you something to work with without having to cut into the injection harness. You said you wanted to cut out the emmision crap so I dunno if you want to take the VCM (vacuum control module) it controls the EGR (emmision crap) but it also runs the AAC (idle control) Alot of people don't run them but just a thought. If you have a oil cooler I assume that the zx was a automatic. You'll have to remove the spacer from the end of the crankshaft and install a pilot bushing before you put on a standard flywheel. Quote Link to comment Share on other sites More sharing options...
Guest znow white Posted June 3, 2004 Share Posted June 3, 2004 i got the fuel pump relay still attached to the harness but I dont know about the other (efi relay?) anyone got a pic? yes it is an automatic where can i get a pilot bushing? is there anything else I maybe missing. Thanks Hussein Quote Link to comment Share on other sites More sharing options...
cygnusx1 Posted June 3, 2004 Share Posted June 3, 2004 Both relays look the same, green cubes. Also get the fuel pump control module (metal box) if you are gonna use it. I put an 83 Turbo Automatic in my 76Z 5-speed. I also used the fusible link box from the ZX to feed both FI and FP relays. http://www.hvmp.com/dc good luck...and we're here if you need help. Dave Quote Link to comment Share on other sites More sharing options...
GrayZee Posted June 3, 2004 Share Posted June 3, 2004 znow white, check your PM's as for the pilot bushing you can get one at any local parts store for about $2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.