Guest 240zt Posted October 17, 2004 Share Posted October 17, 2004 Ok so im reading on the MSII setup and some were in there it said turn the crank to a certian point. Umm if the motor is in the car theres no way you can hand turn this just wondering how you were suppost to acomplish this. Quote Link to comment Share on other sites More sharing options...
akeizm Posted October 17, 2004 Share Posted October 17, 2004 Put the car out of gear, then on the front of the crankshaft there is a large bolt (This is usually inside the a large pully for the alternator belt, think they call it a pully). Get a ratchet with the right sized socket and turn it. Quote Link to comment Share on other sites More sharing options...
Guest 240zt Posted October 17, 2004 Share Posted October 17, 2004 got cha... breaker bar ! Quote Link to comment Share on other sites More sharing options...
Guest bastaad525 Posted October 17, 2004 Share Posted October 17, 2004 It's WAAAAAAAAAAAY easier to do if you remove the spark plugs first. It's also way easier to position the crank to an EXACT point this way as well. Actually with the plugs out and if you loosen the belt(s), it's not too hard to get spinning with your bare hand. Quote Link to comment Share on other sites More sharing options...
akeizm Posted October 18, 2004 Share Posted October 18, 2004 It's WAAAAAAAAAAAY easier to do if you remove the spark plugs first. It's also way easier to position the crank to an EXACT point this way as well. Actually with the plugs out and if you loosen the belt(s)' date=' it's not too hard to get spinning with your bare hand.[/quote'] Oops yes, forgot the spark plugs also hahah. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.