Guest iskone Posted December 15, 2004 Share Posted December 15, 2004 My car has no heater because the distributor is where the hoses sould go. Here is a link to some pics. http://album.hybridz.org/showgallery.php?cat=500&ppuser=8740 Are there any other places in my 280 block that I can get a pressurized line to the heater? I'll get some closer pictures. Isk Quote Link to comment Share on other sites More sharing options...
datsunlover Posted December 15, 2004 Share Posted December 15, 2004 Um.. just curious.. why did you put your dizzy on that side of the engine?!? nice custom work anyway... Um.. could you get/build a 'T' fittng of some sort and tee into the rad hose perhaps? (you may even find something in a wreckers.. I'm sure i've seen somthing like this with a temp sensor in it..you'de just have to drill ithat out and attach a hose.) Then run/jog the smaller dia. heater hose around your dizzy and other obstructions to the firewall... Quote Link to comment Share on other sites More sharing options...
TimZ Posted December 19, 2004 Share Posted December 19, 2004 My car has no heater because the distributor is where the hoses sould go. Actually, I don't think it is. The heater hose usually connects to a hose barb that points straight back, and is located at the base of the water pump inlet at the engine. Here's a not so great pic of mine (I'm using AN fittings, but you should be able to see the orientation)... It looks like you just have a pipe plug in that fitting right now. Pull the plug, get a hose barb in there and hook it up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.