DETurbine Posted January 27, 2005 Share Posted January 27, 2005 Ok I was curious to see how well the Tial 38mm are holding up for everyone pushing decent amounts of boost through it. I am getting a SC61/63 and will be boosting it to around 20-25psi (hopefully around 500hp) and wanted to know if the 38mm will be able to support it. Quote Link to comment Share on other sites More sharing options...
Guest Cronic Posted January 27, 2005 Share Posted January 27, 2005 Yes, but it would be time to think about upgrading when you get over 500. Quote Link to comment Share on other sites More sharing options...
DETurbine Posted January 27, 2005 Author Share Posted January 27, 2005 Yes, but it would be time to think about upgrading when you get over 500. I will in the near future, Just wanted to hear everyones elses experiance with doing this. As long as I get the proper spring rate and get some decent amounts of boost running through it, I should be fine, since the wastegate will not have to release as much gas pressure as it would at lower boost levels. Quote Link to comment Share on other sites More sharing options...
Guest Cronic Posted January 27, 2005 Share Posted January 27, 2005 Well if you start to creep boost, you'll know it's time to change teh wastegate! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.