Guest Bris280zx Posted February 22, 2005 Share Posted February 22, 2005 Hey guys, ive been mucking about with an L28ET doing a few things here and there, one of those things included a T3/TO4E 50|57t|63 turbo, now, i have had some oil supply lines made up but i fear they might be to small (inner diametre) They are about 2-3 mm inner diametre. is this to small for this turbo application? Mat. Quote Link to comment Share on other sites More sharing options...
slownrusty Posted February 22, 2005 Share Posted February 22, 2005 You can use a -4 or -3 size...but either way you will need an oil restrictor inline otherwise you will blow the oil seal out of your turbo. I did this upgrade to my ZXT this past summer, you can check out the pics here: http://www.picturetrail.com/gallery/view?p=999&gid=4811102&uid=504386 Yasin Quote Link to comment Share on other sites More sharing options...
Guest Bris280zx Posted February 22, 2005 Share Posted February 22, 2005 Ahhhh ok, so in this case you have used a smaller fitting at the turbo end to restrict flow? How big was the stock oil lines? Thanks for the repy Mat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.