Lurch2461 Posted September 21, 2005 Share Posted September 21, 2005 Hi All, Just to let everyone know, I have just acquired an F54 block, P90 head and turbo inlet masnifold for AU$640.00 delivered to my door. The head has a mild porting job already, but it has a hot cam as it's normally aspirated. The cam specs in the motor is: 260 degrees duration 0.315 lift clearances: 0.010 inlet & 0.012 exhaust Lobe centres are unknown & could be either 110 or 108 degrees @ 0.050. I have been advised all will be OK if the lobe centres are 110, but to narrow if 108. Can anyone please advise the specs on the STANDARD 280ZXT CAM??? Cheers, Dennis in Ozland Quote Link to comment Share on other sites More sharing options...
Z-Gad Posted September 21, 2005 Share Posted September 21, 2005 http://www.atlanticz.ca/zclub/techtips/cam/index.htm Quote Link to comment Share on other sites More sharing options...
Lurch2461 Posted September 23, 2005 Author Share Posted September 23, 2005 http://www.atlanticz.ca/zclub/techtips/cam/index.htm Thanks heaps, for this information. But I can't believe that from over 60 reads only one could help me. Cheers. Quote Link to comment Share on other sites More sharing options...
kalium99 Posted September 24, 2005 Share Posted September 24, 2005 Hi All' date=' Just to let everyone know, I have just acquired an F54 block, P90 head and turbo inlet masnifold for AU$640.00 delivered to my door. [/quote'] Was that from the states ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.