midnightzxt Posted January 9, 2006 Share Posted January 9, 2006 About a day ago, I started missing cylinders... it would happen off and on, like I would have power, then very little, then power, etc. Eventually, it only misses the cylinders 1 and 5 of a 6 cylinder engine. I tested this by pulling spark plugs. From listening on the end of a screw driver, I noticed that those two cylinders are not firing their injectors. I have a 2 bank injector setup. The connectors on the injectors seem to be fine. I'm going to get a light that Mario said auto stores sell to see if the ECU is sending the signal. What could be happening? All the wires seem to be connected to the ecu, and I'm getting spark. Quick responses would be nice... I have to drive it daily. Quote Link to comment Share on other sites More sharing options...
midnightzxt Posted January 9, 2006 Author Share Posted January 9, 2006 problem solved Quote Link to comment Share on other sites More sharing options...
mobythevan Posted January 9, 2006 Share Posted January 9, 2006 ok, you have to tell us what it was so the next guy with the same sympton that reads this thread has a chance. Quote Link to comment Share on other sites More sharing options...
midnightzxt Posted January 10, 2006 Author Share Posted January 10, 2006 solution: check to make sure that all injecotr wires are connected OH yeah, and it was a good excuse to by injector testors (Niode lights or something like that) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.