Silent Posted February 16, 2006 Share Posted February 16, 2006 offset 4.5 inches on a 15x8 wheel not runnin coil overs car is lowered {a lot} is that makes an difference yay or nay bolt on, or need spacers Quote Link to comment Share on other sites More sharing options...
Silent Posted February 16, 2006 Author Share Posted February 16, 2006 just to add it is 4.5 inches from the hub to the lip of the wheel on the back side. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted February 16, 2006 Share Posted February 16, 2006 4.5" is marginal. It will be very close but you may be lucky with about 1/4" between the OEM springs and the section width of the tire. At least it will be close enough that you should be able to go ahead with whatever plans you have, and adjust for any interference later. Quote Link to comment Share on other sites More sharing options...
Silent Posted February 17, 2006 Author Share Posted February 17, 2006 maybe i'll get some spacers through work, say 1/4 inch or so to give me a little slack and see what happens Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.