blake culp Posted April 12, 2006 Share Posted April 12, 2006 I have my target AFR tables set, and the megasquirt seems to be using them with no problem but how exactally do i set my VE table so it matches my target table. The way it is running now on just the target tables i would always have to have the wideband on the car, and if the wideband went bad im sure some bad things would happen to my motor. Thanks, Blake Quote Link to comment Share on other sites More sharing options...
olie05 Posted April 12, 2006 Share Posted April 12, 2006 http://www.megasquirt.info/megatune.htm#autotune I think what happens is you drive the car around with auto tune on, and it puts values into your VE table, based on what you set for your AFR tables. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted April 12, 2006 Share Posted April 12, 2006 The manual way would be to log the percent correction on a drive then analyze the file at home and re-adjust accordingly the target values that required a large percent correction during the drive. There should be software to automatically update like mentioned, but I haven't chekced into it yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.