zane9000 Posted April 13, 2006 Share Posted April 13, 2006 I am going to be running supra injectors with my megasquirt. I dont want to bother with the flyback board and PWM settings, so I just wanted to convert the Supra injectors to High Impedance. I have searched around but all that I can find is that I need to put a resistor in series with the injector. So my question is what is considered a high impedance and what type of power handling rating does my resistor need? Quote Link to comment Share on other sites More sharing options...
cygnusx1 Posted April 13, 2006 Share Posted April 13, 2006 Read the http://www.sdsefi.com website. It's ALL there. Quote Link to comment Share on other sites More sharing options...
zane9000 Posted April 13, 2006 Author Share Posted April 13, 2006 Awesome! thanks, I will read through it later Quote Link to comment Share on other sites More sharing options...
z-ya Posted April 13, 2006 Share Posted April 13, 2006 Easiest way to do it, is just use a stock 280Z resistor pack. You can also use 5 Ohm 5 Watt resistors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.