HB280ZT Posted May 9, 2006 Share Posted May 9, 2006 Hi All, Well I just came across something interesting for my other car. 1996 Impala SS It runs an optical like the 82 and 83 280ZX distributor and is only running 1 coil. Well the product converts from a single coil to individual coils. http://www.bailey-eng.com/LTCC.html Bob Bailey says that he can do it for any car but not for just one unit. So if anyone is interesting in talking with him more about the unit feel free. If I get my MS working I may look into this more in the future because it sound very interesting and would be pretty cool. But I need to get my Z working first then I can do this mod to my SS. Hope this helps someone out. HB280ZT Quote Link to comment Share on other sites More sharing options...
randy 77zt Posted May 9, 2006 Share Posted May 9, 2006 i have 8 connectors and cop units from a 2003 ford 4.6 truck engine.maybe ms v3 will run these.will need some kind of cylinder id for #1 though.like a hall sensor on the cam or in a distributor.sss510 made a #1 cylinder sensor from a 81zxt dizzy and a cam position sensor from a 2005 v6 mustang.the l28 would look better without plug wires over the valve cover. Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted May 10, 2006 Administrators Share Posted May 10, 2006 Not sure what it would take for MS to run C.O.P., but WOLF EMS does. Good friend Ron Tyler, of Prime EMS, is currently setting up this custom built L-28 that we built a custom P-79 for, utilizing Wolf 3D controlling 6 GM LS-X coils. FWIW, my personal L-28 race powered 240-Z car running flat tops with one of our custom MN-47 heads will be running MSnS-E sparking EDIS, (wasted spark Distributor-less ign). Our MSnS-E project can be seen at these two locations… http://forums.hybridz.org/showthread.php?t=103781 http://www.msefi.com/viewtopic.php?t=15436 Quote Link to comment Share on other sites More sharing options...
Mr.INSANE Posted May 10, 2006 Share Posted May 10, 2006 First off Question your sanity Better spark will not yield that much more horsepower Quote Link to comment Share on other sites More sharing options...
z-ya Posted May 10, 2006 Share Posted May 10, 2006 Paul, I run a Wolf 3D in my turbo car. I run RX7 coil packs as they have the coil drivers built in. Do you know Joe at J&B Welding in Spokane? Pete Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted May 10, 2006 Administrators Share Posted May 10, 2006 Pete, Nope, haven’t heard of him. Is he a Wolf dealer/tuner? If so, Ron T. may know of him. I’m not savvy to the Wolf system other than it seems like a very powerful system and quite stable, (void of the “programming†issues, if you know what I mean), and there is a good chance I will be running it in the future on one of my cars whether it by the race car or the V-8 Z. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted May 10, 2006 Share Posted May 10, 2006 I think the 029 extra code does support 6 spark outputs now, but you still have to wire 6 transistors for coil drivers. Quote Link to comment Share on other sites More sharing options...
z-ya Posted May 11, 2006 Share Posted May 11, 2006 Paul, Joe used to be the Wolf dealer for North America. I'm not sure who is now. The Wolf 3D is a nice unit. I've been running one inmy turbo car for about 6 years now without problems. Moby, I think you are correct, the latest firmware does support COP. Pete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.