alexideways Posted June 16, 2006 Share Posted June 16, 2006 I need to know if the complete tear down and rebuild of the disstributor for the 280Z is present in the Haynes manual, because it's in a box at bottom of an endless pit and I don't whant to dig it for nothing. Thanks. Quote Link to comment Share on other sites More sharing options...
GrayZee Posted June 17, 2006 Share Posted June 17, 2006 Not sure if it is in the book, but what info are you looking for exactly? Perhaps someone can just tell you what you are looking to find. Specs? Tearing it down and putting it back together is a relatively simple job. Not sure if you need a book to figure that out. Quote Link to comment Share on other sites More sharing options...
alexideways Posted June 17, 2006 Author Share Posted June 17, 2006 Well , I started tearing it down and after a few screws, they started to strip so, I got pissed and dug them out with counterclockwise drill bits. When I was done after my half houre lunch brake, I noticed that I did'nt take note of wich side up all the plates and shims were originally so, I'd need some sort of exploded view just to be shure of every thing. Quote Link to comment Share on other sites More sharing options...
alexideways Posted June 18, 2006 Author Share Posted June 18, 2006 Well, just finished putting it bavk together, all the parts semed to have a ghost print of the part that was resting straight against it so, after awhile, I managed to get it back together, spinning freely but, the advance mechanisme is still hard to turn. any suggestions? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.