Jump to content
HybridZ

vacuum diagram!!!stock 77' + need help troule shooting!


Recommended Posts

ok heres my problem car idles at 500 rpm just staying alive(cant adjust)

also hesitates when i press the gas too fast

 

it starts up instantly when i turn the key!(maybe a clue)

 

i also think it maybe the fuel reg.???? unplug the and caped vacuum that goes to it and idle raised t0 700/800rpm

 

also the air reg. is partly open at 78 degree(outside temp) and there is no ohm continuity (i think it is bad) died when i disconnected it and plugged the air lines it died!!!

 

 

 

i have the hayes manuel (which sux!!)

also the FSM but i cant find a diagram in there!

i have a vacuum leak i think

the two vacuum line comming off the intake manifold has 10-15lbsthose run to some dohickies these:image083xf4.jpggreen dotts is vacuum red has no vacuum

 

any one have any ideas where i can get a decent diagram?

 

 

 

 

 

any idea what is wrong with this car!!!!!!!!!!!!!!!:sour:

any ideas will help

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...