Seat belt, Racing harness, interior pieces???

[DavyZ]

Hoover, good to hear that the monster is running (really well I guess) and you've made good headway. Regarding the seatbelts, I had a 510 with a 4 point harness, and we removed 1 harness to give us a little more flexability to getting in and out. It helped a lot! I like the feeling of a wide harness, which is something that you just don't get with stock belts. And with as much power as you are pushing, it's probably a very good idea.

 

Davy

[Guest Anonymous]

Hey Everyone,

 

Haven't been on line for a while. I've been very busy with the family,work and trying to finish my car with a lot of success. Today, I'm installing the DFI software into my lap top and doing some minor adjustments on the lowend side. So far @ 25psi, my Z popped a wheely (I wish I had a pic. or digital camera with me), I didn't expect that one.

 

While installing my interior I forgot about the type of seat belts/harness I wanted to use and wanted to know what eveyone else is using. My new roll cage is cool but it's a small headache to get into. I did my best to keep my car as comfortable as possible, but the roll cage just went over the line. My other Z has a 4 pt. harness which is very impractical for driving around the street. I want to keep functional for an everyday driver. I was thinking of keeping the stock seat belts and also using a 4 pt....

 

Advice?

 

I'm also looking for some interior pieces that were mangled during the roll cage installation. I need a new 71 center console, driver side door panel and heater/vent control panel.

 

 

Thanks,

Hoover

[Guest jcp240z]

Hey Hoover,

Glad to see that the beast will finally breath again

You should look at some of the Schroth belts as a good, daily driver but still save your @ss unit.

[fl327]

dyno that bad boy hooover!!! you need to bring it by the shop too, last time you came by i told the other dudes that you had the 600hp l-series and they all really NEED to see it, and plus you could bring it by for a quote on that paint as well, and gimmie a wheel stand on your way out!

Leonard

[Guest Anonymous]

No wonder my car's front end popped up. My car is running on race fuel and now it has to be down tuned....

 

James, where do I get those seat belts, I need them ASAP while I'm working on the interior and bolting back in the seats.

 

Leonard,

I'm going to spend 2 weeks at the dyno shop trying out different combinations of injectors etc....

 

Again, I NEED interior pieces.....HELP....

[Guest jcp240z]

Try this place. They carry Schroth, TRW-Sabelt, and Sparco

Be a good place to start looking as you can see all the product lines and their relative prices.

Sube Sports

Also try here

Sports Car Accessories

 

[ July 07, 2001: Message edited by: jcp240z ]

[Guest Anonymous]

Thanks for the links, it's exactly what I'm looking for, now I just have to pick one.

 

I want to use the stock mounting bolts for the lap belt, does anyone know if these aftermarket belts will accomodate the stock Z bolts?

[BLKMGK]

The belts I've got have mounts that screw into the stock boltt holes. These are Simpson eye bolts - same as what you see in Jeg's I think. Am actually about to order a couple more though as the eye bolts I've got fit but I've not got the clip for the darned belts - doh!