HB280ZT Posted October 28, 2006 Share Posted October 28, 2006 Hi All, I did a search but could not find any answers to my problem! Well I am having an issue with one of my rebuilt rear wheel hubs, installed new bearings and seals. I am getting about .05" of play in the hub after a rebuild, the FSM says .005 is the max play. I have torqed it to about as much as my tools can support. So what can I do to fix this problem?? Thanks for your help. HB280ZT Quote Link to comment Share on other sites More sharing options...
johnc Posted October 28, 2006 Share Posted October 28, 2006 You might try adding a 1mm thick stainless steel shim that's the same same diameter (ID and OD) as the spacer (distance piece). http://www.mcmaster.com has shims on pages 3070 through 3072 with the metric sizes on page 3072. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.