george.bryant Posted December 6, 2006 Share Posted December 6, 2006 Hey, whats the torque settings for the inlet/exhaust manifolds? And for the manifold to turbo bolts/ Thanks Quote Link to comment Share on other sites More sharing options...
Guest d3c0y z3d Posted December 10, 2006 Share Posted December 10, 2006 F/T - F***ing tight You don't really need specific torque specs just make sure they are tight and you could check them a week later incase a couple have come loose. Quote Link to comment Share on other sites More sharing options...
rztmartini Posted December 11, 2006 Share Posted December 11, 2006 with the work some of us have done to our aluminum heads, i dont think that F/T will work Quote Link to comment Share on other sites More sharing options...
Challenger Posted December 12, 2006 Share Posted December 12, 2006 Turbo to Exhaust manifold= 33-40 ft.lbs Exhaust manifold to engine=25-33 ft.lbs. for 10mm bolts or 11-18 ft.lbs. for 8mm bolts These are for 280zx turbos is that what you wanted? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.