660Z Posted January 4, 2007 Share Posted January 4, 2007 I have a full tube front end and full cage with everything tied in. (car is in the construction phase) My problem is I hate how the halo bar and front down tubes turned out (S&W calls it the rollbar to cage conversion kit) and I am disappionted with how they tied into the front sub frame supports that go though the firewall. The conversion part was a pain to install and ended up looking like crap. I want to cut that section out (Conversion kit) and weld the front sub frame supports to the firewall. So my question is with a tube front end attached to the firewall and an 8 point rollbar (S&W) would I be legal for 9.99-10.0 by NHRA standards. For the sub frame support tubes, can I cut them short to reinforce the firewall and weld in the length of tube I cut out. Would it be safe to do so? I know the main hoop, halo bar and probally the windshield down tubes you have to keep intact for saftey, would the frame support tubes fall into this catagory? Thanks, Mark Quote Link to comment Share on other sites More sharing options...
660Z Posted January 7, 2007 Author Share Posted January 7, 2007 Nevermind I worked it out and am keeping the full gage. Mark Quote Link to comment Share on other sites More sharing options...
v8260 Posted January 7, 2007 Share Posted January 7, 2007 do u have any pics? just out of curuosity. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.