fl327 Posted December 16, 2001 Share Posted December 16, 2001 hey guys, planning on running some mustang rims, the bolt pattern is the same, but they are 24mm offset, will these work, im lowered with coilovers and short springs, i havenet test fit them yet either,im wondering if i could get away with a small spacer?? Quote Link to comment Share on other sites More sharing options...
Guest scca Posted December 16, 2001 Share Posted December 16, 2001 yes.... will need spacer in the rear - dont need the short springs unless going to 8+ inch wide Quote Link to comment Share on other sites More sharing options...
Modern Motorsports Ltd Posted December 16, 2001 Share Posted December 16, 2001 MAX, you likely may not even need any spacer on the rears and possibly not fronts. And up front likely quite a slim one (you said 4lug right, so OEM hubs) +20 fits OK with coilovers and no spacer with 8" rims front/back. +24 may fit as well depending on tires/their specific width (brands vary for same designation) Having said that, max track width is always nice so myself: I'd mount 'em up and then figure out how far I can push them out.... if you decide on spacers I can get them made to your spec's. Oh yeah, Jeromio was running a 4lug 17x8 setup or similar that should have some specs to help you. From his web: "(For those wanting this info, these are Konig Monsoons from Discount Tire. They are 17X8 with a 20mm offset, dual pattern 4 on 4.5 and 4 on 4.25. No spacer or adapter required, but I do have coilovers at all 4 corners. They wouldn't fit otherwise. Tires are 235/45 Dunlop SP5000.)"Jeromio's web Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 16, 2001 Author Share Posted December 16, 2001 great advice again from both of you guyz, ill try it out, you think i could push em out to get more wheel spread, that would cool, not too far though, ill try it. Quote Link to comment Share on other sites More sharing options...
QWKDTSN Posted December 16, 2001 Share Posted December 16, 2001 Are these wheels for the older 64.5-66 or 67 Stangs? Someone said that the bolt pattern was the same for those early years as the stock Datsun pattern recently... How much? What style? Where from? If you get some tell us how they fit Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 17, 2001 Author Share Posted December 17, 2001 hahahahhahhahahahahahah! soon Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted December 17, 2001 Share Posted December 17, 2001 I am almost certain the Ford 4-bolt pattern is 4x4.25. Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 17, 2001 Author Share Posted December 17, 2001 on all but one junky model they still make its 4x4.5 Quote Link to comment Share on other sites More sharing options...
QWKDTSN Posted December 17, 2001 Share Posted December 17, 2001 The newer Fox mustang 4lug wheels are 4.5. they don't fit the stock Datsun hubs, close but not quite. Aren't Datsun 4x100mm? will this interchange with 4x4.25"? Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 17, 2001 Author Share Posted December 17, 2001 the z pattern is 4 by 4.5, most of the cool rims are 4x100, and we cant run em without adaptors, man... Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted December 24, 2001 Share Posted December 24, 2001 1965-1970 6 cylinder Mustangs have 4 lug 4.5 bolt spacing. The Fox cars ( Mustang included) are 4 lug with 4.25 spacing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.