240zprace Posted January 16, 2007 Share Posted January 16, 2007 T3/TO4R- compressor housing is a 70AR and exhaust housing is .82AR... to clear this turbo on a stock turbo manifold, how thick of a spacer should i use.....asap please.. Quote Link to comment Share on other sites More sharing options...
Doug71zt Posted January 17, 2007 Share Posted January 17, 2007 It really depends on how you clock the compressor housing - In the normal position, I imagine that you will need more than 1/2 inch. My 60 trim .60ar T04E housing needed a 1/2 inch spacer to give clearance with the outlet in the 2 oclock position, looking at the inlet of the turbo. If you clock it down at the 5 oclock position, you may be OK without a spacer. Hope this helps a bit. Doug Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.