It's a snap wire kit

[CableSrv]

K so i'm diving into rewiring my 240z today with the It's a snap 21 kit.

 

I was following the painless thread and i'm kinda stumped.

 

My ignition switch has 5 wires coming out of it. I will describe the wires with the primary color first and the trace color secondly.

#1.) 12 gage-White/red-attaches to 12 gage Red of Painless B+ in power from fuse block.

#2.) 12 gage Black/blue-attaches to 12 gage Painless purple from starter.

#3.) Black/white attaches to 18 gage Painless red ignition control for B+ power for my MSD ignition box.

#4.) Blue/red attaches to 18 gage Painless orange and 18 gage Painless brown ( I joined these two together and both are now supplying ignition controlled accessory power ). These power accessories only while ignition is turned on.

#5.) Black/yellow is not being used by me.

 

step 3-5 are not clicking in my head.

 

my harness has a red ign switch power which splits into 2 wires, purple starter wire, brown ign switch acc wire, dark pink ign switch ign wire, light pink ign switch coil wire.

 

is 1 and 3 using the same switch power ? or is 3 using the pink ign switch ign wire ?

 

why is black/yellow not used ? and what does it go to ? what is his orange wire ? is that the ign switch coil wire ? or just the ign switch ign wire ?

 

I believe blueovalz had used this kit i think ? hopefully maybe he can chime in with some help ?

[dat240zg]

I'm finishing up the Autowire kit right now, but unfortunately, the car is at the exhaust shop. When I get it back, I'll try to get the info for you.

 

Bryan

Dat240zg