Kechup Posted February 27, 2007 Share Posted February 27, 2007 Theres a pole on MPturbos in the BS section on TM and it shows 8% failure on shafts and seals. Oil feed and drain setups are probably 6% of those, i have no problems with any of them i have used so dont let failure be a factor, 1000.00 bucks can get you +1000HP, thats lots of boost for your buck. IMO !!!!! I have had such good luck with them that i thought i would give my 2cents. Quote Link to comment Share on other sites More sharing options...
dustin280zx Posted February 27, 2007 Share Posted February 27, 2007 Kechup, what mp turbo are you running or have run? Quote Link to comment Share on other sites More sharing options...
Kechup Posted February 27, 2007 Share Posted February 27, 2007 t70 with a .69AR Quote Link to comment Share on other sites More sharing options...
dustin280zx Posted February 27, 2007 Share Posted February 27, 2007 whats your setup and any dyno time if you dont mind me asking? Quote Link to comment Share on other sites More sharing options...
Kechup Posted February 27, 2007 Share Posted February 27, 2007 No dyno time here, im not sure if i want to know what it makes, all i care bout is time slips and crusin mostly. E-85 is what im running in it so i have to get a 10 gallon can before i can go to the track, man it soaks up some fuel under boost. Junkyard motor right know but i have a 377, bowtie block, scat crank, worked dart heads waiting for it but then i run into rearend problems and cage upgrades. 11psi, 30* lockedout, pluggap at 19-20 and 82-87 jetting an it stays in the 12.0AFRs under ful boost. Quote Link to comment Share on other sites More sharing options...
jbk240z Posted February 28, 2007 Share Posted February 28, 2007 Hanns, I remember in the past you posting that if you had to do it over again, you would go with a single turbo. Maybe being turboless now is a sign. You don't want to change your exhaust setup because of cost. I would bet there would be a few members here that would love to buy your current exhaust/manifold setup. The sale would help to fund the new single setup. Your current setup would probably work in other applications as well, such as your friends Vega, hmmmmmm. Anyway, good luck! Quote Link to comment Share on other sites More sharing options...
Jelloman457 Posted February 28, 2007 Share Posted February 28, 2007 I get great prices (just a couple dollars over cost) from Precision. Thats what I get for starting group buys from the past 2.5 years with them. Quote Link to comment Share on other sites More sharing options...
Turbo Meister Posted March 1, 2007 Author Share Posted March 1, 2007 Thanks everyone, for your suggestions and ideas. I will stay twins and have explored some vendors. I will post my progress and evaluation of them as it develops. Hanns Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.