Accurate Injection Posted April 14, 2007 Share Posted April 14, 2007 Guys we would build this RB26DETT bolt on Package if we could get a group of 10 pre-sold! If anyone wants to take the helm on this let me know! Pictures and information is in this Supporting Thread! http://forums.hybridz.org/showthread.php?p=755862#post755862 Thanks! Kevin Quote Link to comment Share on other sites More sharing options...
TheNeedForZ Posted April 15, 2007 Share Posted April 15, 2007 how much do you charge? Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted April 15, 2007 Author Share Posted April 15, 2007 Well the First Set would be through our App Development Fee see www.extrudabody.biz on Page 2 under Throttle Bodies! think you will like it what you see! We are footing alot of the cost for a willing partner/Car, but it has to have some catches to that car and person! Read it carefully! www.extrudabody.com unde App Developer! To qualify for that you need to be fluent in tuning, have some Fabrication skills and be ready to go ASAP! For the Group it would be $1600 each set! and that is for everything! 6 ITB's Anodized Clear 1 ITB to Manifold Base Plate Anodized Clear 1 ITB to Plenum Base Plate with Recessed Horns Clear or Red Anodized 1 Plenum Bolt On Clear or Red Anodized It will be Sheet Metal Fabrication Similar to the one shown! Input from customer is also welcome! 6 Air Horns 1 TPS 5 Shaft Couplings Red Anodized 1 Fuel rail Clear Anodized 2 End Covers Red Anodized 2 -6AN fittings Red Anodized 2 T-slot Nuts Red Anodized and Stainless Hardware 2 Fuel Rail Struts and Standoffs Red Anodized 1 Throttle Cam 1 Throttle Stop 3 Return Springs 18 Gaskets Includes All Harware and is Stainless! Injectors and FPR not Included! We will do 90% of the Assembly here before shipping the Package out! That Price is a Introductory Group Buy Price of Course! Joel's care Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted April 15, 2007 Author Share Posted April 15, 2007 Guys I redesigned the RB26DETT Plenum Base Plate so Now it will work for L28 Turbo's as well! If you use a Cannon or Weber Manifold they have a 102mm c to c bore spacing from cylinder #2 to #3 and #4 to #5, the RB26DETT has a 103mm C to C. Now with the redsign it will work for both! So if any L28T's want to get in on the Group buy it will be the same Price! Thanks Kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.