nategdizzle Posted May 1, 2007 Share Posted May 1, 2007 Im doing away with the cracked up dirty turbine housing and looking for a t4 housing. What size & trim housing and turbine would be the most efficient with a .60 t04b compressor 3" inlet 2"out. The compressor wheel is 2 9/16in at the base and 1 7/8in at the top +-.03", crapy calipers not sure if it matters though. There are 8 large fins and 8 smaller fins inbetween the larger ones any help identifying it would rock, oh yeah there is an A stamped on the wheel and the tag on the housing says t04b80 if that helps. I would like to push 450+hp without having too terrible long to wait for boost. i imagine a .68 would do the trick? Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted May 1, 2007 Share Posted May 1, 2007 How about running a holset that should fill your wishes? They work pretty well (spool early) and bolt to your stock manifold... Just an idea... Quote Link to comment Share on other sites More sharing options...
nategdizzle Posted May 2, 2007 Author Share Posted May 2, 2007 i saw a video on u tube of a guy with hy35 or something and it sounded bad roasting them at 60 without tryin too hard and smokin a fairly beefy 300zxtt..i havent looked at anything but t series thusfar but im open to new things...what type of holset do 450+ guys use and by the way are 42lb injectors enough to supply those kinds of boosts Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted May 8, 2007 Share Posted May 8, 2007 that would be the member "Big-Phil" here.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.