Scottie-GNZ Posted May 24, 2002 Share Posted May 24, 2002 In about a month I will be looking to complete the front brake upgrade and wondered if there would be any interest in buying my current setup. It is not one of the popular swaps but has served me well and it will be CHEAP. - 82-83 Calipers and caliper brackets - 84-85 vented rotors, cut down to fit the calipers - KVR carbon pads - 71 hubs complete with bearings and Nissan comp studs, 2+" long - Stainless braided lines. With a decent price there are lots of pros to this swap, but there is a con. If you do this conversion you are committed to it. The threads on the spindles must be reamed out for the bolt to pass through and thread into the ZX caliper bracket. This opposite of the stock setup. Will include all the bolts and shims I am currently using. I know this swap is not for everyone and that is why I am throwing out this bone, else it will just go in my "junk" pile. What would be considered a reasonably good buy for this setup? You can see the shims between the spindle and the caliper bracket in the 2nd pic. Quote Link to comment Share on other sites More sharing options...
clint78z Posted May 24, 2002 Share Posted May 24, 2002 CHEAP what a coincidence, my middle first name starts with C I will mabey check with SCCA or RossC to see if it will fit my expectations. I plan on doing some track events, I don't expect to win just have a nice setup that brakes won't die on me. Sparked my intrest !! What do you plan doing with those new big binders?? Quote Link to comment Share on other sites More sharing options...
Peternell Posted May 24, 2002 Share Posted May 24, 2002 Scottie, you've got mail! Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted May 27, 2002 Author Share Posted May 27, 2002 SOLD. Quote Link to comment Share on other sites More sharing options...
CruxGNZ Posted May 30, 2002 Share Posted May 30, 2002 Aww, crap!! I missed out! I need front brakes to put my car back on the road. !M! Quote Link to comment Share on other sites More sharing options...
Guest scca Posted May 30, 2002 Share Posted May 30, 2002 i've got a set of them - you need to make the (mic) the washers yourself but i have the rotors and calipers.. have 2 sets i think. make an offer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.