dat240zg Posted June 6, 2007 Share Posted June 6, 2007 Guys: I'm getting ready to weld on the lower perchs for my MML coilover setup but have a question. From the instructions I'm gathering that you slide the mild steel bushing and then set the threaded sleeve on top so that the top of the threaded sleeve is supposed to be approx 1/4" from the top of the strut housing. Is this correct? I searched and saw a good many pics but all of the people had placed theirs so that the top of the threaded sleeve is from the looks of it over an inch below the top of the housing. Any advice? Thanks. Bryan Quote Link to comment Share on other sites More sharing options...
dat240zg Posted June 6, 2007 Author Share Posted June 6, 2007 OK. I'm an idiot. Hukd on fonix - wrkz fur me. Sheez. A little further down in the instructions and it gives more of an explanation. Doh. Bryan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.