nienberg.11 Posted July 12, 2007 Share Posted July 12, 2007 If you want to use the stock 280z CLT sensor, these are the temp/resistance values that I measured for it. It reads almost dead-on now. The IAT values on the right are just the GM defaults to go with my Buick IAT sensor. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted July 24, 2007 Share Posted July 24, 2007 I am going to link this from the install guide, thanks for the info. Quote Link to comment Share on other sites More sharing options...
24OZ Posted January 6, 2009 Share Posted January 6, 2009 Sorry to be digging up an old post. But would these values be the same for the coolant head temp sensor in the L28ET engine also? Quote Link to comment Share on other sites More sharing options...
mobythevan Posted January 6, 2009 Share Posted January 6, 2009 I believe the values for the CHTS are in the installation sticky Quote Link to comment Share on other sites More sharing options...
24OZ Posted January 6, 2009 Share Posted January 6, 2009 I believe the values for the CHTS are in the installation sticky Moby you are correct my bad. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted January 7, 2009 Share Posted January 7, 2009 No problem, sometimes this stuff is scattered around. Quote Link to comment Share on other sites More sharing options...
FricFrac Posted November 26, 2011 Share Posted November 26, 2011 CHTS from the FSM chart Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.