datman Posted August 7, 2007 Share Posted August 7, 2007 Can anyone tell me what setting the dwell should be set for on MSII using EDIS? I would have thought it should be set to zero as the EDIS handles dwell. I have my ignition setting set up as per the manual but I see movment on the dwell dial. Thanks Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted August 7, 2007 Administrators Share Posted August 7, 2007 The EDIS module handles the dwell, NOT mega squirt. Nothing to set "dwell" wise in MS when using EDIS. Mega squirt only sends a pulse signal to the EDIS module which the EDIS module interprets as the desired amount of ignition advance, which the EDIS module then delivers. The only control you have or need over EDIS when using Mega Squirt is the timing advance table. That’s it. Quote Link to comment Share on other sites More sharing options...
datman Posted August 8, 2007 Author Share Posted August 8, 2007 Thanks Braap, that's what I thought but my MS dial for Dwell shows it is doing something even though I set the ignition settings in MS for EDIS. Is that normal? Quote Link to comment Share on other sites More sharing options...
naviathan Posted August 8, 2007 Share Posted August 8, 2007 Check everything. I believe there's some warmup dwell changes and such you should set to 0. Quote Link to comment Share on other sites More sharing options...
datman Posted April 5, 2008 Author Share Posted April 5, 2008 Still have this problem.....dwell dial shows dwell is changing although edis should deal with dwell. Because I have EDIS selected for ignition the Dwell settings are in grey so I can't change them. Is this normal? Quote Link to comment Share on other sites More sharing options...
datman Posted April 7, 2008 Author Share Posted April 7, 2008 Justin from DIY was good enough to answer this for me.....the dwell dial is actually the SAW signal when using EDIS Thanks for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.