TurkishSquirrel Posted August 19, 2007 Share Posted August 19, 2007 My A/C doesn't work, and it was recommended I replace the dryer as well as the expansion valve, the valve I know is corroded shut, and the dryer is probably dead anyways. The dryer is easy to access, but i don't know how to get to the expansion valve. I know it sits behind the vent panel/air control panel, but I don't know how to reach. Any help as to how to get the panel off and remove the valve? Thanks Quote Link to comment Share on other sites More sharing options...
Savage42 Posted August 19, 2007 Share Posted August 19, 2007 You need to pull the dash and then you can remove the box that the Evap core & expansion valve sit in. I'm currently going through my A/C stuff, so I may retro fit something newer there for the Evap core, as everything else will be newer R134 stuff. I'm assuming that you already had a place evacuate your system? Make sure you have the system fully evacuated to get out all moisture before adding refridgerant and make sure to add oil and leak dye to the system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.