john72z Posted August 20, 2007 Share Posted August 20, 2007 Hi, How does the inner CV joint disassemble? I have read a lot about the 280ZXT halfshafts but the 300ZXT is a different animal. I am installing MM flanges with fresh grease on the outer CV's and thought new grease for the inners would be a good idea. Any info would be greatly appreciated. Thanks, John Quote Link to comment Share on other sites More sharing options...
hoov100 Posted August 20, 2007 Share Posted August 20, 2007 the axles on my 85 zxt just slid right out, just pull off the boot and be prepared for lots of grease.. Quote Link to comment Share on other sites More sharing options...
Rollins240z Posted August 22, 2007 Share Posted August 22, 2007 If you email modernmotorsports they will send you a pdf write up w/ pictures that do an awesome job of walking you thru the steps. You will need a small bearing puller and a snap-ring remover tool. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.