vrocious Posted September 12, 2007 Share Posted September 12, 2007 is it possible to turn my n/a l28 into a turbo using donor parts from a l20et? had a look around and couldnt really find anything on it. would it be possble to get the necessary internals and injectors off it and bolt on to the l28 or are piston sizes etc different, so not just stroke that makes the difference in displacement on these motors. Quote Link to comment Share on other sites More sharing options...
vrocious Posted September 12, 2007 Author Share Posted September 12, 2007 i've since found on the net that a few people have just bolted up the turbo etc onto a n/a l28 but this poses problems about compression ratio, how much boost is it running, will it kill the motor, what about injectors and what about ecu as 280zx is not a learning ecu Quote Link to comment Share on other sites More sharing options...
stagefumer11 Posted September 13, 2007 Share Posted September 13, 2007 is it possible to turn my n/a l28 into a turbo using donor parts from a l20et? had a look around and couldnt really find anything on it. would it be possble to get the necessary internals and injectors off it and bolt on to the l28 or are piston sizes etc different, so not just stroke that makes the difference in displacement on these motors. you can do this easly. but its best to get the l20et loom/ecu/dizzy/afm and dizzy oil pump drive. Replace all this gear on the l28, find some vg30et injectors (270cc) and run from there, Should be pretty pepy. the small turbo off the l20et will give instant response on the l28. But will run out of breath easly Quote Link to comment Share on other sites More sharing options...
vrocious Posted September 14, 2007 Author Share Posted September 14, 2007 any extra breath is good extra breath though. cheers for the info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.