mario_82_ZXT Posted September 26, 2007 Share Posted September 26, 2007 This is the last thing I do to my L28ET, if this fails I'm ripping it out and declaring it junk. It seems like injectors 3-4 are stuck open. So much so that they are washing down the cylinder walls. The car runs pretty well at higher rpms, but will run like crap if turned off then back on in a short amount of time ( <1hr). When I removed the plugs, those 2 were the only ones not a nice tan color, and they reeked of fuel (not oil). From what I have gathered so far is that you need a smaller lower seal (does anyone have a part number/description?) and a slightly large hose to slip over the o-ring (I know you're supposed to use an o-ring fuel rail but I've heard of people running them like this). Is that about it? I will be able to retune my MS easily with my WBO2. Thanks, Mario Quote Link to comment Share on other sites More sharing options...
TONY C Posted September 26, 2007 Share Posted September 26, 2007 I am running supra injectors and used the stock replacement "O" rings for the supra. I had my JSK fuel rail drilled out for "o" rings but I see no problem running them with a hose and clamp. I would not try to slip the hose over an "o" ring. just get rid of it and use injection clamps instead of the cheapos Quote Link to comment Share on other sites More sharing options...
mario_82_ZXT Posted September 26, 2007 Author Share Posted September 26, 2007 That's what I meant for the hose. I read about the o-rings in the L28ET fuel injector upgrade thread, but it's good to know it's not needed. I use the stock insulators and mounting hardware right? Is there a place to get the connectors as my Bosch style ones don't look like they will fit... Mario Quote Link to comment Share on other sites More sharing options...
NCchris Posted October 3, 2007 Share Posted October 3, 2007 Is there a place to get the connectors as my Bosch style ones don't look like they will fit...Mario Anybody have a source for these injector clips? I'm gonna need them too.... chris Quote Link to comment Share on other sites More sharing options...
wigenOut-S30 Posted October 3, 2007 Share Posted October 3, 2007 Anybody have a source for these injector clips? I'm gonna need them too....chris You can get them at the junk yard. Any mrk3 supra will have them. ALso other Toyota's will have clips very similar.. you may have to trim a notch off the injector itself and then the clips click right in. Quote Link to comment Share on other sites More sharing options...
rwdawg2 Posted October 12, 2007 Share Posted October 12, 2007 check the supra forums, that's where i got mine both injectors and clips. "supra" cheap price. lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.