fast-datsun Posted March 20, 2008 Share Posted March 20, 2008 If we wanted the same set up, how much??? can each side be fitted with a plate so we can build a enclosed manifold for each side???? Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted March 20, 2008 Author Share Posted March 20, 2008 Hey Fast: We can build them to your needs and build a Plenum Plate like the pictures and Link below, but designed for the Bore Spacing on the 5.6 motor! http://www.extrudabody.biz/servlet/the-199/Plenum-Plate-100mm/Detail The injector Bridges would give you Staged injection option as well if you wanted. I will give you a Call Today or you can call us 850-835-1588, direct line to my desk!! May have a 510 X-Member sale for you as well! Thanks! Kevin Quote Link to comment Share on other sites More sharing options...
tay-fu300zxtt Posted March 20, 2008 Share Posted March 20, 2008 awsome Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted March 29, 2008 Share Posted March 29, 2008 What about a set up for the VQ35 motors????????? Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted March 29, 2008 Author Share Posted March 29, 2008 Mack: We're there buddy, all it takes is a little Green stampage and a couple of weeks! It's not going to happen with Electronic Throttle control however! Kevin Quote Link to comment Share on other sites More sharing options...
Pete84 Posted March 30, 2008 Share Posted March 30, 2008 Would it be possible to run ITB's on a VQ35 with a aftermarket ECU? Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted March 30, 2008 Author Share Posted March 30, 2008 Sure it would! The same concept works just the the Ford 302 below! ITB's could be reversed as well so the Injectors are on the below the ITB's as well. All depends on runner length! Kevin Quote Link to comment Share on other sites More sharing options...
Guest ZX2NV Posted March 31, 2008 Share Posted March 31, 2008 Sure it would! The same concept works just the the Ford 302 below! ITB's could be reversed as well so the Injectors are on the below the ITB's as well. All depends on runner length! Kevin Hi Kevin I have got to say this thread is great you guys certainly produce some amazing intake gear. I also read with great interest a memebr who was going to talk to you about the Nissan vh45 V8 engines and possibly send you an intake setup for possible reproduction with the ITB setup. I am very interested in this setup also. Here in Australia the VH45 is gaining poularity due to its strong design and awesome power potential. So far the use has been limited to speed boats etc however I am trying to change that. I have been working with some members of the Nicoclub forums to bring a vh45 to Nissan z32 5 speed gearbox adaptor into the country for resale. I hope that once a good gearbox option is available here for the engine that demand will increase for the both the engines and aftermarket gear such as ITB setups etc. I am personally building a VH45 to put into my new Z32 300zx race car. I currently have a 1995 Z32 which puts out just over 400 rwhp on the stock engine and turbochargers. Its a heavily modified setup but still uses the stock turbos and engine internals. Anyway thats about it for the intro my email address is jason@oasisairservices.com.au feel free to email me directly with any updates or questions etc I am more than pleased to help out Jason Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted March 31, 2008 Author Share Posted March 31, 2008 Hey Jason: Check you email box! Kevin Quote Link to comment Share on other sites More sharing options...
OlderThanMe Posted April 9, 2008 Share Posted April 9, 2008 I am working on an ITB manifold for the VH45 (with 1990-1993 heads) for these ITBs. It is going to be a good bit of work to build and have the intake be very efficient because of the angle of the intake runners. I don't want to just bolt the TBs onto the top of the runners.... Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted April 9, 2008 Author Share Posted April 9, 2008 Can I help in some way? The closer the Throttle Plates are to the Valve the better the throttle response is going to be, as I'm sure you know. The length/size of the runner is where the Torque is built at! Kevin Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted April 12, 2008 Share Posted April 12, 2008 Mack: We're there buddy, all it takes is a little Green stampage and a couple of weeks! It's not going to happen with Electronic Throttle control however! Kevin Thats good because I do not like the electric throttle....Mack Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted April 12, 2008 Author Share Posted April 12, 2008 Hahahaha! Well most don't, but if it were possible with our Bodies the number of people wanting them would jump exponentially! We are now officially working on the VQ35 application! Stay tune for updates! Kevin Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted April 15, 2008 Share Posted April 15, 2008 I will try to call this week and get info for our R&D work for the 5.6 and 3.5 motors... mack Quote Link to comment Share on other sites More sharing options...
Jared Posted May 14, 2008 Share Posted May 14, 2008 Is any of this stuff available yet? I'll be needing at least an adapter plate soon, maybe a manifold if budget allows. Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted May 14, 2008 Author Share Posted May 14, 2008 The Transmission Plates are not up to me, they are being worked on by someone else. Honestly nothing to report there! VQ35? Who want's a sneak peak? Kevin Quote Link to comment Share on other sites More sharing options...
Jared Posted May 15, 2008 Share Posted May 15, 2008 what about the throttle bodies? are they ready? can you get one with a plenum or dual plenums? or do you just sell the weldable base plates? Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted May 15, 2008 Author Share Posted May 15, 2008 For the VK or the VQ? VK are available here: http://www.extrudabody.biz/servlet/the-222/KIT-cln--Nissan-Titan-ITB/Detail Kevin Quote Link to comment Share on other sites More sharing options...
Jared Posted May 15, 2008 Share Posted May 15, 2008 for vk Quote Link to comment Share on other sites More sharing options...
Accurate Injection Posted May 16, 2008 Author Share Posted May 16, 2008 Hey Jared: Click the Link above! Kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.