blackedoutz Posted November 23, 2007 Share Posted November 23, 2007 ok so i am trying to install ms in my 280z with the 81 l28et. question is how to get the ms to work with my msd 6a i have the 81 cas with blank dizzy, ms1 v2.2 board WITH OUT the relay board i know this topic has been discuessed but not with my particular set up also do i need to jumer xG1 to xG2 with the ms1 v2.2 board or is that just for the 3.0 board?? i have searched and searched but cant seem to find right way to wire it please help!!!! Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted November 23, 2007 Share Posted November 23, 2007 The MS1/Extra manual covers most of the mods you'll need: http://www.msextra.com/manuals/MS_Extra_Manual_Index.htm Quote Link to comment Share on other sites More sharing options...
mobythevan Posted November 26, 2007 Share Posted November 26, 2007 The jumper for XG1 to XG2 needs to be installed on V2.2 boards for the "normal" setup on an L28ET with 83 dizzy. I think this is also true with the 81 CAS. Quote Link to comment Share on other sites More sharing options...
blackedoutz Posted November 28, 2007 Author Share Posted November 28, 2007 thanks moby, now as far as the msd 6a goes i have the orange and black on the coil and the F idle from the ms box going into the white signal wire on the msd i take it that is correct? Quote Link to comment Share on other sites More sharing options...
mobythevan Posted November 29, 2007 Share Posted November 29, 2007 I haven't wired an MSD box Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.