240hoke Posted November 30, 2007 Share Posted November 30, 2007 sorry yes I meant parallel like Olie drew up, sorry for the late fix. My stock 350z dual rail setup ran a single supply with both rails arranged in a dead head setup, not the best design but they did have a pulsation damper on each rail like tonyd is talking about. I would think you would especially want this is you didn't run them parallel. Quote Link to comment Share on other sites More sharing options...
510six Posted December 9, 2007 Share Posted December 9, 2007 I thought methanol eats through normal injector bodies... If not i have 2 spare new 4runner injectors that I want to do the same to... Mario Methanol does eat regular injector bodies up, it requires special injectors. http://www.fiveomotorsport.com/Injector_SetsMODS.asp The secondary injector control on the AEM EMS controlls two 1600cc injectors spraying methanol into the intake piping and providing 35% of the total fuel under boost. Reconditioned 1600cc methanol compatable injectors can go for as little as $119 for a set of two. http://www.cardomain.com/ride/2071134/5 Bosch CIS injection systems use a very effective stock accumulator. http://www.auto-solve.com/mech_inj.htm Quote Link to comment Share on other sites More sharing options...
Careless Posted December 10, 2007 Share Posted December 10, 2007 ross machine also sells injector bungs that weld over 3 inch piping at a nice angle, and they can take pretty much any injector style with a choice of 11 or 14 mm inlets too. its a nice unit to carry those 1600cc injectors =) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.