Guest Anonymous Posted January 20, 2003 Share Posted January 20, 2003 Went through and buffed my alluminum alloys made by 'Prime' to get rid of some overspray that occured while in storage. Got most of it off but had to use a sanding sponge for an area about 10 inches long which did the job but put tiny scratches in the finish. Didn't really look like there was a finish on the wheels like clear coat etc to begin with. Wondering now what I can use to seal the finish? once I rub the tiny scratches out with wet sand paper(s). Quote Link to comment Share on other sites More sharing options...
Pop N Wood Posted January 21, 2003 Share Posted January 21, 2003 I would try car paste wax. If it doesn't work you can strip the wax by washing with liquid dish soap. I know wax cleans up file marks in raw aluminum perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.