ezzzzzzz Posted January 30, 2008 Share Posted January 30, 2008 For anyone running the 280ZXT or 300ZX conversion flanges on their S30 I need a quick measurement. Can you please provide the thickness of the machined flange that is tig welded to the stock stub axle flange? The 280ZXT should be about 1" to 1.5" thick and the 300ZX should be about .5" thick. These are the only measurements I need. It should take all of a couple of minutes to do this. Any assistance would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
nullbound Posted January 31, 2008 Share Posted January 31, 2008 I just measured my 300ZX flanges and they are 0.5" thick. Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted January 31, 2008 Author Share Posted January 31, 2008 Thanks, Nullbound! That's a start. Now I only need the 280ZXT measurement. Quote Link to comment Share on other sites More sharing options...
DCZ Posted February 2, 2008 Share Posted February 2, 2008 My 280zxt flange is about 29mm or 1 5/32 inch. Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted February 3, 2008 Author Share Posted February 3, 2008 DCZ, Thanks for taking the time to climb under your car too. With this info I can continue the companion flange fabrications. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.