Jump to content
HybridZ

need help with a getting running


Recommended Posts

A little more info on the car and the engine would be helpful. Any way here is a guess for you and something you can look at. If the car "runs" as you are starting it but dies when you let go of the key you may want to check the wires on your ignition switch to make sure that when the key is in the "run" position that you are getting power through the system. To me it sounds like your car thinks the key is in the "ACC" position when you let go of the key.

 

Dragonfly

Link to comment
Share on other sites

its a 1977 280zx it has a l28e in it with 0 miles on it and it doesnt make since why its doing it i will check that today but it ran before the motor was swapped. Any suggestions let me know thanks. As soon as wee turn the key to on the fuel pump kicks on and stays on and as soon as your turn over it starts up then just dies. Thanks let me know any other suggestions

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...