toLSZ Posted March 22, 2008 Share Posted March 22, 2008 well i wanted to shave off the side turn signal markers... i have a painless wiring harness. so i clipped the hot and the ground to each marker and continue to body work and etc.. so i go to turn tonight and my friends noticed my right turn signals stay on, but my driver side signals will not work... any suggestions? do each one of the markers need to be grounded? everything was working fine right befor i cut those wires... any help would be great! Quote Link to comment Share on other sites More sharing options...
80LS1T Posted March 22, 2008 Share Posted March 22, 2008 Yes each light needs to be grounded. Unless you have all the ground wires for the lights hooked up to each other, then you would only need one ground(I wouldn't do it this way). I just wired my car with a painless kit too. The painless kit only provides power for the circuits, you must provide a ground for each circuit. Guy Quote Link to comment Share on other sites More sharing options...
toLSZ Posted March 22, 2008 Author Share Posted March 22, 2008 see i thought that might do the trick,but... see the power goes to the bulb, and the ground well its soderd on the ligh hosing so i didnt know if that somhow grounds out.. elec is not my fav part of car building thats for sure.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.